WAVE KAISER
Thermal Wave Perm, Above its value
Thermal Wave Perm, change one’s mind
WAVE KAISER
| TYPE |
Champagne gold color
(Champagne Gold)
STAND TYPE
STAND TYPE
-
Front view -
Side view
ARM TYPE
ARM TYPE
Front view
WAVER KAISER
| FEATURES |
01
A smart technology that has newly evolved.
The Wavekaiser is equipped with a smart sensor
controlling temperature of each cable to minimize hair
damage, and a professional function that realized a new
function proposed by hairdresser, which was not present
until now.
-
-
Temperature precision control/sensor
In contrast to the conventional products, the excessive temperature increase in rods is controlled by the temperature sensor’s precision control, an accurate temperature control has been realized. Based on its MS unit temperature precision control, it accurately reaches the finally set-up temperature of the mode within shortest time.
-
-
SMPS
As it is a trans-less type that converts alternative current into direct current based on electronic control trans method, it has realized approximately 80% of the weight lightening of the conventional trans-type.
-
-
PCB
It can be used at optimum speed of a salon with its high efficiency and by considering safety of the user.
02
Large-sized TFT LCD + smart display
Based on the utilization of a 5-inch FULL COLOR TFT LCD, it relieves fatigue of the users with its clear definition, and provides convenience with its simple and smart controlling method.
System and design patent applications
(Patent No.-2021-0087712)
03
Upgraded function of creating LLLT synergy curls
Based on its LLLT (LOW LEVEL LASER THERAPY) function, it helps facilitating the creation of curls to express bouncy curls, and cares the hair with LIGHT, thereby preventing hair damage.
-
-
LLLT
(Low Level Laser Therapy) Improved facilitation effect and curl formation based on its laser therapy function.* Based on the laser therapy function called LLLT, which is attached on the upper side of its interior, it minimizes and prevents hair damage. In addition, it penetrates inside the scalp tissue to improve cell metabolism and protein production, thereby also giving positive impacts on the hair loss as well.
04
Air Booster Cooling Function
The air multi-flier generates smooth and yet strong wind. The air booster’s cooling function decreases the temperature of the hair rapidly, thereby creating elastic curls.
-
-
AIR BOOSTER
After a procedure is completed, a fan is operated for 3 minutes after a non-use time of 2 minutes.※ AIR BOOSTER
As the cooling function decreases the temperature of the hair rapidly, it is able to achieve much more elastic curls and minimize the procedure time.
05
Digital Artificial Intelligence Connect
Based on the digital artificial intelligence, it checks and inspects the cables
and rods in real time for their abnormality.
Through its Welcome Connect function, the user is able to use the device at
its optimum condition at all times.
The user is able to detect rod abnormality status in real time through the LED
colors.
In contrast to the conventional devices that only detected
abnormality in rods before starting operation, it detects rod
abnormality in real time to indicate it with the LEDs, and
generated an alarm sound.
06
Professional function
It is able to control total of 40 rods simultaneously, by group, or
individually based on the operation mode, or control the temperature
for the whole group. This allows expressing more free designs through
temperature control in each location of the hair.
System and design patent applications
(Patent No.-2021-0087712)
-
-
Port mode
This mode allows setting up temperature individually based on the damage to total of 10 cables. Since each area of the hair has different damage conditions, the user should distinguish the port for each damage type to differently set up the temperature before use. It minimizes damage caused by heat.
-
-
3-block mode
This mode allows dividing the cable into 1, 2, and 3 blocks for setting up temperature for each block. It is much more convenient if the user classifies the healthy and damaged hair to set up the temperature before use.
[Block 1 – 1, 2, 3] [Block 2 – 4, 5, 6, 7] [Block 3 – 8, 9, 10]
-
-
Section mode
This customized mode allows setting up temperature and time based on the hair damage in each section of sections 1, 2, and 3. It responds to damaged hair, and sets up the temperature for each section, thereby minimizing damage caused by heat via using low high-low temperature method.
07
Film rod
As an ultra-light film-type rod, it has less power consumption, and transfers
the heat conductivity in a rapid and uniform way.
[LONG - 18,20,22,24]/[SHORT - 12,14,16,18,20,22,24,28,30]
08
Detailed
characteristics
-
-
Basket
As a basket fixed on a stand, it allows storing rods and non-woven fabrics, etc. required for procedures, thereby allowing the user to more conveniently perform the procedure.
-
-
Power cord
It can be easily disassembled and assembled if the power cord is faulty, and also A/S can be performed easily.
-
-
Handle
User convenience is improved by placing the cables on the left and right handles.
-
-
Over-time check
This function allows checking the time elapsed after completion of a procedure up to 60 minutes.
WAVE KAISER
| Name of each part of the product |
-
Front side / rear side
WAVE KAISER
| Names of control panel parts |
WAVE KAISER
| Basic configuration |
-
Rods
-
Non-woven fabrics
-
Scrap papers
-
Tweezers
-
Cables
-
Power cord
WAVE KAISER
| How to use |
Turn on the power switch located at the bottom of the main body.
Connect the cable to the rod.
Press the mode configuration button to set up the mode.
Based on the above table, please control temperature and time, etc. depending on the hair condition or type of chemical solution.
After selecting the mode, press Start/Stop button to start operation.
Check if the LED is indicated on the lamp after operation.
If LED is indicated on the lamp, it is operating normally
When operation is completed, turn OFF the power and store the device.
WAVE KAISER
| Machine packaging size |
Length X Width X Height (mm)
-
Main body
Stand type | 660 x 430 x 455 (13.1kg)
Wall-mounting type | 660 x 430 x 455 (12.2kg)
-
Lower part of the stand
730 x 670 x 180 (9.1kg)
Wall mounting arm
910 x 280 x 160 (9.7kg)
